메뉴 건너뛰기

XEDITION

HP

#/opt/hp/hpacucli/bin/hpacucli ctrl all show status

 

Smart Array P420i in Slot 0 (Embedded)

   Controller Status: OK

   Cache Status: OK

   Battery/Capacitor Status: OK

 

 

#/opt/hp/hpacucli/bin/hpacucli ctrl all show config detail

 

Smart Array P420i in Slot 0 (Embedded)

   Bus Interface: PCI

   Slot: 0

   RAID 6 (ADG) Status: Disabled

   Controller Status: OK

   Hardware Revision: B

   Firmware Version: 3.42

   Rebuild Priority: Medium

   Expand Priority: Medium

   Surface Scan Delay: 15 secs

   Surface Scan Mode: Idle

   Queue Depth: Automatic

   Monitor and Performance Delay: 60  min

   Elevator Sort: Enabled

   Degraded Performance Optimization: Disabled

   Inconsistency Repair Policy: Disabled

   Wait for Cache Room: Disabled

   Surface Analysis Inconsistency Notification: Disabled

   Post Prompt Timeout: 0 secs

   Cache Board Present: True

   Cache Status: OK

   Cache Ratio: 10% Read / 90% Write

   Drive Write Cache: Disabled

   Total Cache Size: 1024 MB

   Total Cache Memory Available: 816 MB

   No-Battery Write Cache: Disabled

   Cache Backup Power Source: Capacitors

   Battery/Capacitor Count: 1

   Battery/Capacitor Status: OK

   SATA NCQ Supported: True

   Spare Activation Mode: Activate on drive failure

   Controller Temperature (C): 64

   Cache Module Temperature (C): 31

   Capacitor Temperature  (C): 21

위로